Testing the newly purchased wire rope before use is a necessary factor to ensure the safety of the wire rope during use. Wire rope detection can avoid accidents. How to detect it? Please follow the steps below.
1. Check whether the wire rope is cracked or deformed. In the state of cracked deformation, you should be careful not to use it again to avoid accidents.
2. Check the diameter. The diameter is an important parameter for detecting the wire rope, which can reflect the changing speed of the diameter and whether the wire rope has withstood a large impact load.
3. Check the degree of wear, the size of the degree of wear of the wire rope infers the actual carrying capacity of the wire rope.
4. Check the broken wires. The wire rope will have broken wires in the later use process, especially in the later period of use, check whether there are broken wires and prevent safety accidents.
One of the most important indicators when testing a newly purchased wire rope is the safety factor of the wire rope.
The safety factor of the wire rope is an important safety technical index to measure the safety performance and safety status of the hoisting wire rope. When selecting and using steel wire ropes, in order to ensure the safe use of steel wire ropes, it must be ensured that its safety factor is not less than the minimum value specified.
The safety factor of the steel wire rope is equal to the ratio of the sum of the measured breaking force of the qualified steel wire rope to the maximum static pulling force (including the static pulling force caused by the rope end load and the weight of the wire rope).
The above is the inspection of the wire rope before use. Only regular non-destructive inspection of the wire rope can prevent the wire rope from breaking and other accidents during the later use. For more information, please contact us or visit our website.
